HOW OUR STE-VAC HEATER WORKS
Product pumps through straight stainless steel tubes inside an insulated, steam- heated drum. Steam enters through two distributor inlets and heats the tubes, while a turbine-type vacuum pump continuously draws off condensate and non-condensable gases.
Tubes run in series or in parallel, and they connect at each end with smooth 180° returns secured by heavy-duty tri-clamp unions. Product moves at high velocity from inlet to outlet. A sanitary temperature bulb in the product discharge controls the steam supply to hold your target temperature.
FEATURES & BENEFITS
- No Burn-on Heating – Ample tube spacing and high-velocity flow keep product from scorching on the tube walls, even through long production runs.
- Handles a Wide Range of Viscosities – Processes everything from water-like fluids to paste-like products, including those with solids and particulates.
- Clean-in-Place Functionality – A fully CIP design with minimal gasketing keeps sanitation simple.
- Easy Inspection – Tri-clamp unions on every return can open for easy access to all product surfaces.
- Steady Temperature Control – Air-operated controls with a recording temperature and pressure controller hold your set point through every run.
SPECIFICATIONS
- Capacity: 10 to 280 GPM
- Heating surface: 55 to 330 sq. ft.
- Configurations: 14, 28, or 56 tubes; 10, 12½, or 15 ft. heating lengths; series or parallel flow
- Tubes: 1” or 1½” tubes; Type 304 or 316 polished stainless steel
- Construction: welded ¼” boiler plate drum, 7/8″ solid stainless steel heads, 1″ fiberglass insulation, 16-gauge polished Type 304 stainless steel jacket
- Connections: tri-clamp inlet and outlet; 1½” to 3″ product connections
- Options: limited ASME certification; steam trap in place of the condensate pump



