Hero - Instant Chiller

INSTANT CHILLER

Industrial Fluid Chiller for 33°F Water in a Single Pass
Chester-Jensen’s Instant Chiller is a stainless steel Short Gas Flow evaporator system that chills water, brine, and other fluids to within 1°F of their freezing points in a single pass, without danger of freeze-up.

HOW OUR FALLING FILM
INSTANT CHILLER WORKS

Water enters a stainless steel distributing trough at the top of the unit and flows by gravity in a thin film over both sides of the corrugated cooling sections below. Refrigerant circulates inside each section, so the water chills as it falls and collects in the tank at the bottom, ready to pump or gravity-feed to your process.

Our patented Short Gas Flow design lets refrigerant gas escape each section by the shortest possible route. That keeps the whole cooling surface uniformly cold, reduces the load on your compressor, and gets you a lower water temperature in one pass than other chiller designs can deliver.

FEATURES & BENEFITS
  • Open Type or Closed Type – Open Type works for ingredient water, beverages, juices, and syrups. Closed Type works for circulating water, brine, and glycol.
  • Single Pass Chilling – 33°F water in one pass, guaranteed.
  • No Freeze-Up – Chills fluids to within a degree of freezing without risking damage to the equipment.
  • Short Gas Flow Efficiency – Higher suction pressure means less compressor horsepower per ton of refrigeration.
  • Small Footprint – A standard 12-section unit chills about 8,200 gallons per hour of 75°F water to 33°F in roughly 5½ by 6 feet of floor space.
  • Easy to Clean – Open Type units have lift-off side and front covers, and cooling sections spaced 4″ apart for brushing.
  • Room to Grow – Specify a larger frame now, and add cooling sections later as your demand increases.
SPECIFICATIONS
  • Cooling sections: patented Short Gas Flow, ASME certified for 250 PSIG at 200°F
  • Configurations: 1 to 4, 5 to 8, or 9 to 12 cooling sections (21 or 32 corrugations, 60″ effective length); larger units built to order
  • Open Type: lift-off side and front covers; stainless steel construction with insulated collecting tank; 2B wire brushed, 2B ground smooth, or No. 4 polish finish
  • Closed Type: lift-off top covers; six standard cabinet sizes, uninsulated or insulated, with 2B or No. 4 polished exterior
  • Materials: Type 304 or 316 stainless steel
  • Refrigerants: Ammonia, Freon, or other alternative refrigerant controls. Glycol units are also available.
How Our Falling Film Instant Chiller Works

APPLICATIONS

Common uses include:

  • Ingredient water for dough in bakeries, wort in breweries, and fruit-flavored drinks in dairies
  • Cooling mandated make-up water in USDA regulated poultry and turkey eviscerating plants
  • Recirculating red water chillers in poultry and turkey plants
  • Brines, marinades, and injectable solutions in meat and poultry operations
  • Process chilled water loops for spray or immersion chilling of smoked meats, poultry, seafood, pasta, and packaged foods
  • Pre-cooling return water to support an undersized Ice Builder
Instant Chiller - Applications

RELATED PRODUCTS

PART OF A COMPLETE CHILLING SYSTEM

Our Instant Chiller is the heart of several Chester-Jensen engineered systems.

“WALKING BEAM” HOT DOG BRINE CHILL SYSTEM

A brine deluge tunnel that chills hot dogs and other stick-mounted products from the smokehouse.

Walking Beam Hot Dog Brine Chill System

INDUSTRIAL WATER CHILLERS,
SIZED TO YOUR PROCESS

Every Chester-Jensen Instant Chiller is hand-fabricated in the USA and backed by a one-year parts and labor warranty. Tell us about your process and the temperature you need, and an engineer will size the right unit for you.

Industrial Water Chillers