Hero - Ice Builder

AIR-AGITATED ICE BUILDER

Thermal Ice Storage for a Steady Supply of Cold Process Water
The Chester-Jensen Air-Agitated Ice Builder stores refrigeration in the form of ice during off-peak hours to provide a continuous supply of 32°F water throughout the process day.

HOW OUR ICE BUILDER WORKS

Refrigerant runs through a coil matrix inside an insulated water tank, building a bank of ice around the coils during off-peak or non-operating hours. During the next cycle of plant operations, the stored 32°F ice water is delivered from the tank to heat exchangers, kettle jackets, and other process equipment for various plant cooling loads and is then returned to the unit to repeat the process.

A low-pressure blower bubbles air up through a single perforated stainless steel pipe at the bottom of the tank. That air agitation melts the ice bank evenly and keeps outgoing water at a constant low temperature for as long as ice remains on the coils.

FEATURES & BENEFITS
  • Lower equipment investment – Using our Ice Builder allows you to size refrigeration equipment for average demand rather than peak demand.
  • Lower operating costs – Build ice when local electric rates are lowest, and run your refrigeration efficiently at all times.
  • Constant cold water – Air agitation keeps outgoing water at a steady low temperature as long as ice is on the coils.
  • Fully automatic – Automatic ice thickness and water level controls balance refrigeration supply to demand.
  • Easy to maintain – The capped air distribution pipe blows clear of sediment by removing a single cap.
  • Indoor or outdoor – Units come fully equipped for indoor or outdoor installation, and can be custom built to fit your available space.
SPECIFICATIONS
  • Capacity: 1,000 to 142,000 lbs. of ice; multiple dimensions available for the same capacity
  • Rating: 1,000 lbs. of ice per ton of refrigeration, based on 2½” ice thickness
  • Refrigerant: ammonia (flooded or direct expansion), Freon, or glycol
  • Construction: insulated heavy steel plate tank with interlocking insulated covers
  • Coils: heavy-wall Schedule 40 steel pipe
  • Air agitation: 1½” stainless steel distributor with low-pressure blower
  • Controls: automatic ice thickness control and automatic water level control
Featured - Ice Builder 1

Need chilled water to combat 24/7 operation?

Our Duplex Ice Builder divides the unit into two separate zones, allowing water to burn off ice on one side while ice builds on the opposite side. When the ice is depleted on the first side, flow control valves automatically switch to redirect water through the inactive side, taking advantage of the full compliment of reserved ice. Never run out of ice again!

See Our Duplex Ice Builder In Action

APPLICATIONS

Built for production, dairy, and chemical processing facilities that need a reliable source of chilled process water.

Common uses for our Ice Builder include:

  • Continuous low-temperature water for daily industrial process cooling loads
  • Chilling water for heat exchangers that cool milk and dairy products, beverages, baked goods, and flexible packaged foods
  • Jacket cooling for cook kettles
  • Latent thermal storage in the HVAC industry
Featured - Ice Builder 2

RELATED PRODUCTS

PART OF A COMPLETE CHILLING SYSTEM

The Ice Builder supplies the cold water behind two of our engineered systems.

COOK-CHILL SYSTEM

Our Cooker-Cooler, Pump-Fill Station, Tumbler-Chiller, Cook-Chill Tank, and Ice Builder working together to produce and store large volumes of ready-to-serve food.

Cook-Chill Systems

A THERMAL ICE STORAGE SYSTEM
SIZED FOR YOUR BUSIEST DAY

Every Chester-Jensen Ice Builder is hand-fabricated in the USA and backed by a one-year parts and labor warranty. Tell us about your daily cooling load and your peak hours, and our engineers will size the right unit for your application.

Featured - Ice Builder 3